P2 AA Laser Aluminum Nozzle, Tos Phaser, Art Asylum, Phaser Metal Parts

$11.99
Description

Star Trek™ Aluminum Nozzle for Art Asylum™ © ® or similar P2 shells (acrylic emitter not included)

PRICE IS EACH, NO SET-SCREW OR TAP, NO ACRYLIC EMITTER

Finished 6063-T5 Aluminum Alloy (British HE9), not hard anodized: ready for 12mm laser module or traditional light bulb installation.

This Aluminum Nozzle MidGrade replica is a one part design (no ratchet effect) extensively prototyped and engineered & re-engineered by me to allow a quick retrofit to Art Asylum P2 TOS shells, while being the most efficient combined heat-sink & heat-dissipator possible when used with a standard 12 mm diameter laser module.

I have provided; photo’s of the item you get

This is a very special item. The aluminum is NOT ANODIZED and is of a more workable alloy type than others on the market. Why?, I used a special 6063-T5 un-anodized aluminum because it is workable by a prop builder. Anodizing most often hardens the material surface making it difficult to; machine, grain and/or, further polish. I want you to have options.

My aluminum is easy to; mirror polish even-more, drill, file, acid weather, rolex grain and, do anything else you can come up with, your the prop builder and I say have some fun! I also do not like anodizing because it does not look “prop authentic” to the 1960’s TV show.

Watch “How It’s Made” PASTE THIS LINK: https://www.youtube.com/watch?v=HJVifbd-lDw&t=25s

Working It: Put a wood ½” dowel in a drill, sand THE DOWEL down to for the 31/64” hole diameter, mount the part, and you have a mini-lathe to; file, grain, polish, and do what you like, to this part.

Nozzle Size & Details: The standard Trek MidGrade nominal 1-1/16 diameter x 15/16” long exposed decorative part. Overall part is nominal 1-⅞”. Details were primarily taken from the Fiberglass midgrade phaser nozzle “style” as exhibited in the “Paul Allen Family Collection” (currently at the Star Trek 50th exhibit at the Seattle EMP/MoPOP Museum) and the "West Coast Collector's" Midgrade Phaser photographs that are on-line.

Mounting Hole Dimension: Split-style shell or other detail by you; 0.600" diameter shaft hole, 0.800" diameter interior collar. Some builders use a 0.800" hole in a non-split-shell and retain the nozzle with a hand cut sheet metal horse-shoe shape retainer, using a “U” shape 0.600" diameter cut-out in a small rectangular piece of thin metal.

Compatible With: Art Asylum © ™ ®, HMS Roddenberry Resin Kits © ™ ®, Shanko Fiberglass Hero’s, 23rd Century Pistol Kits © ™ ®, remember you're the prop builder !

PASTE THIS LINK FOR HOW-TO-MODIFY AN ART ASYLUM, https://youtu.be/2w14mqJaBDw

Acrylic Emitter (not provided in this auction): Accepts standard 5/16 aftermarket scifiprops/ecrater emitter, or modify the “Art Asylum © ™ ®” emitter, or make your own from some 5/16” acrylic rod & sandpaper & with an electric drill, or lathe. You're the prop builder !

Acrylic Emitter Fit (not provided in this auction): The aluminum has a hole 0.313” for the acrylic. This may be a force-fit (no glue if you chose none). You will need to fit the emitter by lightly sanding down the acrylic diameter so it can be pushed-in. If you have a press you can just force-fit the acrylic without sanding.

Laser Module Size: Fits standard 12 mm diameter modules of both full or half length (use the full length ones). Modules available on ebay from DTR-LPF: PASTE LINK TO DTR-LPF http://stores.ebay.com/dtr-lpf?_trksid=p2047675.l2563

I SUGGEST YOU ORDER LASER MODULES WITHOUT CHROME FOCUS RINGS FOR EASE OF INSTALLATION, THESE COIN-EDGE CHROME RINGS ALSO CAN BE TAKEN OFF BY YOU. You're the prop builder !

Laser Module Cavity Nominal: 12.00 mm to 12.02 mm (31/64” approx.) diameter x 35mm ( 1-11/32” ) depth to accept the full module. There is a PILOT HOLE FOR YOU TO ADD A SET-SCREW TO SECURE THE LASER MODULE.

Thermal Conduction: My 6063 is rated at 210 W/m*K 15% higher than 6064/6262 (higher is better for Laser applications). 6064 (also known as 6262) is great for anodizing but has a lower thermal conduction rating of 172 W/m*K. The one part design is a most efficient combined heat-sink & heat-dissipator .

Accurate: I think you can't get more accurate than this nozzle, you can own the same type of nozzle seen in most of the Star Trek episodes on TV, aka a MidGrade. This nozzle is entirely hand machined on a lathe and indexed end-mill. It is not extruded aluminum (the TV show did not use such an extrusion). It is not anodized. The front radius is very small to conform to the screen captures I reviewed and my first hand observations of the Paul G. Allen Phaser at the EMP/MoPOP ( p.s. thanks TV re-mastering too...).

You get what you see in the photographs, but ask questions anyway…..live long and question..

Also visit ONLINE : startrekpropauthority or yourprops to learn all about Phasers and nozzle designs…

How Accurate Is This Midgrade Style Nozzle?
You can be the judge of that by researching screen shots from the 1960’s. When comparing this Nozzle to episode “screen images” it can be quickly noticed it matches what was used on-set more often than any other nozzle currently produced for prop makers. Most importantly this reproduced prop nozzle is made a softer un-anodized aluminum, just like the originals.

The reason I made some of these to sell was in response to many many inquiries on my YouTube “startrekguy 2012” channel.

Warranty & Service Information:
Hate it? Return it in 14 days following ECRATER Policy. Buyer pays return shipping.

You may also like...